Support Center

DVP-100 Login Guide

Last Updated: Oct 24, 2016 03:08PM PDT

DVP-100 Login Guide

Q: I have trouble logging into the DVP-100. What is wrong?

A: The DVP-100 uses WiFi technology and as there is a growing number of equipment using this same technology it can get very crowded and you may find that it is sometime hard to log into the DVP-100.

If this is the case, first try to set it on a different WIFI channel. A different frequency can also help.

To do that, do the following:

1. The DVP-100 will create its own Wi-Fi hotspot network called ‘dvPrompter’.
2. Connect your devices to the ‘dvPrompter’ Wi-Fi network
3. Once connected, type the unit’s IP address into a web browser, by default this is
4. You will be asked to login: the username is ‘admin’ and the password is ‘000000’
5. Once login is successful, select the ‘Wireless’ tab. By default, the device is in ‘Access Point Mode’, and in this mode, you can select the Wi-Fi frequency and channel number as well as setting the DVP-100 device IP address.
6. Change the settings
7. Click Apply and reboot the device.

Contact Us

  • Email Us
  • Call Us


    @ +1 (562) 696-2324

    EU Office

    @ +31 30 261 9656

    Singapore Office

    @ +65 6749 6866

    India Office

    @ +91 120 242 7337
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
Invalid characters found