Support Center

PTC-150 / PTC-150T Firmware Release Notes

Last Updated: Aug 03, 2017 02:40PM PDT
PTC-150 / PTC-150T
Firmware Release Notes



Version 2.8 | Released 07-25-17
MB CPU: V1.82
MB FPGA: V019
MCTL CPU: V1.00
  • Fixed issue with RMC-180 controlling PTC-150 (v 2.7) after the camera powers on
  • Set the default white balance to 5600K Outdoor mode
  • Changed 1080i60 to 1080i59.94 in the Video Output sub-menu

Version 2.7 | Released 07-13-17
MB CPU: V1.79
MB FPGA: V019
MCTL CPU: V1.00
  • Added focus, iris, shutter, and white balance settings to saved presets
  • Simplified the way to adjust iris and gain at the same time
  • Modified the default shutter speed to 1/90
  • Improved DVIP stability
  • Fixed control issue with PTZ controller software 3.7
  • Fixed RS422/VISCA power on command issue


Version 2.6 | Released 04-18-17
MB CPU: V1.53
MB FPGA: V019
MCTL CPU: V1.00
  • Added the acceleration item in the motor setting (fast / middle / slow, default= middle)
  • Added the selection of P/T speed in the motor setting (normal / 2x, default=normal)
  • Reduced the P/T motor speed
  • Adjusted the P/T braking distance


Version 2.5 | Released 12-07-16
MB CPU: V1.42
MB FPGA: V019
MCTL CPU: V0.48
  • Now supports TriCaster Mini
  • Fixed incorrect parameters of auto iris limit when the PTC-150 is controlled by RS-422 [P]
  • Fixed mirror mode issue with RMC-180 [P]
  • Now supports High Resolution Mode function. The default is “On” [S]
  • Add the color bar mode report in the RS-422 status report


Version 2.4 | Released 09-06-16
MB CPU: V1.34
MB FPGA: V019
MCTL CPU: V0.48
  • Fixed issue with status response to RMC180 by HDbase-T-RS422


Version 2.3 (Beta) | Released 08-10-16
MB CPU: V1.32
MB FPGA: V019
MCTL CPU: V0.48
  • Fixed PTZ speed issue when the RMC-180 joystick slows down the pan or tilt speed
  • Fix the problem:the camera still moving till direction when the RMC-180 joystick from up/left to stop/left direction (MCTL)
  • Fixed issue with stopping focus in manual focus mode by RMC-180 (MCPU)
  • Added the focus speed setting for manual focus mode, where 1 is the slowest
  • Modified the timing of capture the P/T positions to improve the stability of P/T/Z coordinates in 59.94 modes


Version 2.2 | Released 05-31-16
MB CPU :                   V1.26
MB FPGA:                  V019
MCTL CPU:                V0.43
  • Fixed Auto White Balance issue when switching the WB mode from manual to AWB
  • Fix the problem: Didn't reset the zoom position after selected the reset P/T/Z of the menu
  • Modified the default camera aperture value=4


Version 2.1 | Released 04-22-16
MB CPU :                   V1.22
MB FPGA:                  V019
MCTL CPU:                V0.43
  • Fix the problem:The color distortion in the CV output when White Balance set to 4200K
  • Fix the problem: Modified the string "6500K (OUTDOOR)" to  "5600K (OUTDOOR)"
  • Fix the problem: Corrected the error about drop field No. in the PTZ information output
  • Fix the problem: Stabilized the Pan/Tilt step offset in the PTZ information output
  • Now supports the PTC-150T.
  • Disabled the drop frame field counting in the 59.94 system


The following firmware versions were for the
PTC-150 only and not the PTC-150T



Version 2.0 | Released 01-18-16
MB CPU :                   V1.18
MB FPGA:                  V018
MCTL CPU:                V0.42
  • Fixed vertical noise on CV output


Version 1.9 | Released 12-25-15
MB CPU :                   V1.18
MB FPGA:                  V017
MCTL CPU:                V0.42
  • Fix the problem: Correctted the VIC No. in the HDMI stream for 1080i50, 1080p50/60, 720p50/60
  • Fixed the delay time in the special function "PTZ Information Output"
  • Fixed OSD color issue with end line numeric characters (FPGA 017)
  • Fixed the string of video mode after left the video mode parameter setting
  • Fixed the string "REMOTE SOURCE" in the REMOTE CONTROL setting
  • Moved the OSD position to the screen center in the 720p mode (FPGA 017)
  • Modified the string "SMART ATW" to "SMART AWB"


Version 1.8 | Released 12-08-15
MB CPU :                   V1.14
MB FPGA:                  V016
MCTL CPU:                V0.42
  • Fixed issue storing R/B Gain of MWB after power cycle
  • Activated the "Night(B/W)" mode selection of camera.
  • Factory Default PAN/TILT speed is now 6
  • Limit motor torque to less than 6 (MCTL 0.42)


Version 1.7 | Released 11-10-15
MB CPU: V1.07
MB FPGA: V016
MCTL CPU: V0.42
  • Improved PAN/TILT position precision (MCPU,MCTL)
  • fix the GAMMA setting characters over one line length in the menu


Version 1.6 | Released 08-28-15
MB CPU: V1.00
MB FPGA: V016
MCTL CPU: V0.29

1) Fixed color bar level & vector (FPGA) [S]
2) Reduced the white dot noise in 1080p50/60 modes (FPGA)
3) Fixed gamma setting issue after factory reset (MCPU) [S]
4) Added the "WD" setting item for SONY module.(MCPU)



Version 1.5 | Released 07-29-15
MB CPU: V0.96
MB FPGA: V015
MCTL CPU: V0.29
  • Fix the problem [P]: Can not link the Panasonic CAM module (MCPU) 
  • Fix the problem [S]: Can not Set the mirror from RMC-180 (MCPU)
  • Add the focus speed setting item
  • Modified the action of selection video resolution by DIP switch (MCPU)
    (Switch immediately and no need to power on again)


Version 1.4 | Released 07-24-15
MB CPU: V0.93
MB FPGA: V015
MCTL CPU: V0.29
  • Fixed zoom position issue not changing in PTZ info or RS-422 (MCPU) [S]
  • Modified the default value in DNR, Gain Limit (MCPU)


Version 1.3 | Released 07-21-15
MB CPU: V0.92
MB FPGA: V015
MCTL CPU: V0.29
  • Modified HDMI signal timing (FPGA)
  • Modified test mode speed (MCTL)
  • Modified the IR receiver program to avoid the error repeat command (MCPU)
  • Fixed the error return "B" gain value of WB in the RS422 INQ (MCPU)
  • Fixed issue where RS-422 crashed after received an invalid command (MCPU)
  • Increased internal linking commands by the VISCA protocol (MCPU) [S]


Version 1.2 | Released 06-08-15
MB CPU: V0.81
MB FPGA: V013
MCTL CPU: V0.27
  • Fix the problem: the RS422 remote control will crash after receiced the "IR_receive_return" command from PTZ_controller APP (MCPU)
  • In the V14 FPGA code have HDMI ouput not stable problem (FPGA)
  • Disabled yellow tally light (MCTL)
  • Add the function to recover the last position after power on again (mcpu+mctl)
  • Add the cam. aperture setting (MCPU)
  • Add the field No. counter & send in the data stream (MCPU)
  • Improve the repeat action in the IR remote control (MCPU)
  • Fixed DVIP control issue with MCPU 0.65
  • Fixed black dot issue with white video on CV output (FPGA)


Version 1.1 | Released 05-06-15
MB CPU :                   V0.65
MB FPGA:                  V013
MCTL CPU:                V0.25
  • Fix the problem: Can not power on by IR remote controller  in IR_CAM 2,3,4
  • Add the function: the P/T offset adjustment for the origin
  • Fixed CV output color space
  • Improved the edge detail of CV output in 1080i50/59.94 mode

Contact Us

  • Email Us
  • Call Us

    USA

    @ +1 (562) 696-2324

    EU Office

    @ +31 30 261 9656

    UK Office

    @ +44 1457 851000

    Singapore Office

    @ +65 6749 6866

    India Office

    @ +91 120 242 7337

eeb31f9fc244f80caad877e9551752eb@datavideocorporation.desk-mail.com
https://cdn.desk.com/
false
desk
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
false
Invalid characters found
/customer/en/portal/articles/autocomplete