Support Center

BC-200 / BC-200T Firmware Release Notes

Last Updated: Dec 06, 2017 10:07AM PST
BC-200 / BC-200T
Firmware Release Notes




Version 0.48 | Released 9-21-17
MB CPU: V0.48
MCTL CPU: V1.00
  • Bug Fix: Cannot reply the VISCA status command in sleep mode
  • Bug Fix: Cannot be powered on by DVIP in sleep mode
  • Bug Fix: Some boards display bad OSD
  • Bug Fix: Not easy to switch to 4K mode correctly
  • Bug Fix: Cannot switch to 720p50 mode by RS422 control
  • Bug Fix: WB mode can be stored & recalled
  • Bug Fix: WB mode is 5600K after reset all
     
  • Change: Set the default WB mode=5600K
  • Change: Changed the OSD’s "1080i60" option to "1080i59.94"
  • Change: Set the digital zoom MAX = 4x (zoom position=7000h)
  • Change: Set the default of AE compensation to 6 to avoid over exposure in the AGC ON mode
  • Change: Change the VISCA Command Model No. = 0202 for easier identification by RMC180 controller
  • Change: VISCA command status reply: Except for AWB/ATW or MWB, all other modes should reply mode = 3 to facilitate LED indicator lighting on the RMC-180
  • Change: The VISCA ID reply time via the RS-422 interface is designed for camera cascade application so that interference between cameras does not occur


Version 0.27 | Released 5-15-17
MB CPU: V0.27
  • First release

Contact Us

  • Email Us
  • Call Us

    Americas

    @ +1 (562) 696-2324

    E.M.E.A.

    @ +31 30 261 9656

    Asia Pacific

    @ +65 6749 6866

    India

    @ +91 120 242 7337

eeb31f9fc244f80caad877e9551752eb@datavideocorporation.desk-mail.com
https://cdn.desk.com/
false
desk
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
false
Invalid characters found
/customer/en/portal/articles/autocomplete