Adjusting RMC-180 Preset Speeds
This guide is for the RMC-180 and PTC-150
The RMC-180 stores preset information on the camera. When you save a preset, the active memory speed is written to the preset.
Menu option "FN8: Memory Speed" allows you to adjust the speed value you write to your presets for each individual camera. Values range from 6-18 and the factory default is 6. If 6 is too slow, a value between 12 and recommended.
Note that when you recall a preset, it recalls at the memory speed at the time the preset was written, and not the active Memory Speed value in the RMC-180. This allows you to set a different speed value for each preset if desired.
-I set the Memory Speed to 10
-I store preset 1 at memory speed 10
-I change the Memory Speed to 8
-I store preset 2 at memory speed 8
-I store preset 3 at memory speed 8 as well
-I change the Memory Speed to 16
-I store preset 4 at memory speed 16
-I change the Memory Speed to 14
-I recall preset 1, it will perform the recall at speed 10, not 14
-I recall preset 2, it will perform the recall at speed 8, not 14 or 10
-I recall preset 3, it will perform the recall at speed 8, not 14 or 10
-I recall preset 4, it will perform the recall at speed 16, not 14, 10, or 8